I. click Start > Run.. ketik MSCONFIG. Pada tab startup hilangkan check (V) pada CVLU.EXE. Lalu lihat alamat tempat file CVLU.EXE ditempatkan. Itu induk dari virus tersebut.
II. tekan kombinasi tombol CTRL+ALT+DELETE satu kali untuk membuka Task Manager. Pada tab process, kill process CVLU.EXE.
III. delete file CVLU.EXE pada lokasi yang ditunjukkan oleh MSCONFIG tadi.. tenang, virus itu sudah non-aktif sekarang.
IV. delete CVLU.EXE pada Removable Disk lalu delete AUTORUN.INF.
Setelah itu copy seluruh data anda dari Removable Disk ke satu folder di HDD, lalu format Removable Disk anda. Masukkan kembali file² yang ada.. selesai..
How do I determine if my BlackBerry is "unlocked"?
How do I determine if my BlackBerry is "unlocked"?
From BlackBerryFAQ
To determine if your BlackBerry is "unlocked" for use on carriers other than for which it is branded:1. On your BlackBerry, go to Options > Advanced Options > Sim Card.
2. At that screen type MEPD (see note below) on your keyboard. A new menu will pop up.
- If your BlackBerry has a SureType keyboard (71xx and 81xx devices) you will need to double-tap the P, so the actual keys entered become M E P P D.
4. If your device is "unlocked", it should say Disabled or Inactive. If it says Active, it's still locked to that carrier.
Images of Locked Device
 |
Images of Unlocked Device
 |
Depresi Pasca Melahirkan dan Baby Blues
Depresi Pasca Melahirkan dan Baby Blues
04 March 2007
Wanita yang baru melahirkan kadang mengalami perasaan yang tak menentu. Satu waktu wanita tersebut merasa senang, tiba-tiba perasaannya berubah menjadi sedih. Kadang hal tersebut disertai oleh turunnya nafsu makan, sulit tidur, bahkan sulit berkonsentrasi. Gejala ini biasanya muncul 3-4 hari setelah melahirkan dan bisa berlangsung selama beberapa hari. Tapi apakah hal tersebut wajar? 04 March 2007
Jika Anda baru saja menjadi ibu dan mengalami hal tersebut, itu berarti Anda mengalami apa yang disebut sebagai baby blues. Hal ini sering dianggap sebagai hal yang wajar terjadi pada awal-awal seseorang menjadi ibu dan biasanya akan hilang setelah 10 hari. Namun pada beberapa wanita hal ini berlangsung lebih lama dan lebih parah sehingga mengarah pada depresi. Inilah yang disebut “sindrom depresi pasca melahirkan”.
Apakah Sindrom Depresi Pasca Melahirkan itu?
Depresi Pasca melahirkan merupakan suatu penyakit, sama seperti diabetes atau penyakit jantung. Oleh sebab itu bisa disembuhkan dengan terapi, konseling, dan pemberian obat antidepresi. Untuk mengetahui sindrom ini, sebaiknya Anda mengetahui dahulu beberapa gejala depresi pasca melahirkan:
- Hilangnya ketertarikan terhadap hidup.
- Hilangnya nafsu makan.
- Energi dan motivasi berkurang sehingga sulit melakukan kegiatan.
- Mengalami sulit tidur atau justru tidur lebih lama dari biasanya.
- Mudah menangis atu merasa sedih.
- Merasa tak berharga, tak punya harapan, atau merasa bersalah yang berlebihan.
- Merasa lelah, mudah tersinggung dan cemas.
- Mengalami penurunan atau kenaikan berat badan tanpa sebab yang jelas.
- Merasa hidupnya tak menyenangkan.
- Memiliki pikiran untuk menyakiti diri sendiri.
- Khawatir berlebihan akan menyakiti bayinya.
Dalam beberapa kasus, ada wanita yang baru merasakan depresi setelah berminggu-minggu atau berbulan-bulan sehabis melahirkan. Biasanya depresi yang terjadi dalam jangka waktu 6 bulan setelah proses persalinan termasuk dalam kategori depresi pasca melahirkan.
Siapa yang Berisiko Terkena?
Depresi Pasca Melahirkan biasanya dialami oleh wanita dengan criteria sebagai berikut:
- Pernah mengalami depresi pasca melahirkan.
- Pernah mengalami depresi yang tak berhubungan dengan kehamilan.
- Mengalami sakit sebelum datang bulan yang parah.
- Perkawinan yang bermasalah.
- Hanya memiliki sedikit keluarga atau teman yang bisa diandalkan atau diajak bicara.
- Memiliki hidup yang penuh tekanan selama kehamilan atau setelah melahirkan.
Mengapa Banyak Wanita Mengalami Depresi Pasca Melahirkan?
Penyebab pastinya belum diketahui. Tingkat hormon mengalami perubahan selama kehamilan dan setelah melahirkan. Hormon-hormon tersebut dapat mengakibatkan perubahan zat kimia pada otak dan hal tersebut berperan dalam terjadinya depresi.
Jika Anda mengalami depresi, bukan berarti Anda adalah orang yang tidak baik. Jadi, jangan menyalahkan diri sendiri karena itu justru akan membuat kesehatan Anda lebih buruk.
Apa yang Harus Dilakukan Jika Menderita Depresi Pasca Melahirkan?
Jika Anda baru melahirkan dan merasa sedih, cemas, mudah tersinggung, lekas lelah atau salah satu dari gejala yang disebut sebelumnya, ingatlah bahwa banyak wanita yang mengalami hal yang sama. Anda tidaklah gila atau kehilangan akal sehat, dan Anda tak perlu merasa sendirian. Berikut ini ada beberapa tips yang dirasa dapat membantu meringankan depresi pasca melahirkan:
- Bicarakan tentang perasaan Anda pada seseorang yang dapat mendengar Anda.
- Pekerjakan orang yang dapat membantu Anda mengurus bayi dan menyelesaikan pekerjaan rumah tangga. Ini bisa membuat Anda bisa sedikit bersantai dan beristirahat.
- Cari waktu untuk diri sendiri, walau hanya 15 menit dalam sehari. Anda bsia membaca, berolahraga, berendam, atau bermeditasi.
- Tulislah buku harian sebagai sarana untuk mengungkapkan perasaan Anda. Ketika sudah merasa lebih baik, baca kembali buku harian tersebut untuk mengingatkan betapa Anda telah berada dalam keadaan yang lebih baik.
- Jangan merasa sedih atau marah jika hanya dapat menyelesaikan satu pekerjaan dalam satu hari.
- Anda tidak perlu menjadi “supermom”. Jika Anda merasa butuh bantuan, beritahukan orang-orang terdekat Anda.
- Bicarakan hal ini dengan dokter Anda. Dia akan merujuk Anda untuk mengikuti terapi atau meminum obat tertentu yang dapat membantu Anda.
Be Creative !
Be Creative !
When someone tells you that you can't do something...
Look around...
Consider all options...
Then GO for it!
Use all the things God gave you!
Be creative!
In the end, you will succeed and prove them wrong!
Always Remember,
"When there is a will, there is a way"
Windows XP selalu restart saat dinyalakan
Windows XP selalu restart saat dinyalakan.
Windows XP yang sering restart sendiri kadangkala disebabkan oleh virus yang menyerang system. Tetapi bisa juga disebabkan oleh hilang/rusaknya file kernel32.dll yaitu ditandai dengan windows langsung restart saat baru muncul logo windows berlatar belakang hitam sebelum masuk jendela welcome screen layar biru.
Masalah yang sama juga terjadi saat masuk ke safemode yang selalu restart dan gagal booting ke windows sehingga anda tidak bisa masuk ke dalam windows.Anda dapat mengembalikan file kernel32.dll yang hilang/rusak dengan menggunakan CD Windows XP,jalankan cara dibawah ini:
Masukan CD Windows XP kedalam drive CdRoom anda.
Restart komputer dan booting dari CD Windows XP dengan memilih urutan boot prioritas pertama pada CdRoom.
Setelah masuk ke layar instalasi,tekan tombol [R] untuk menuju mode Recovery console.
Pilih lokasi instalasi Windows XP anda dan masukan password administrator.
Setelah muncul command prompt ketik:
cd system32 lalu
ren kernel32.dll kernel32.old lalu enter.
expand D:\i386\kernel32.dl_ tekan enter lagi.
exit
Windows XP yang sering restart sendiri kadangkala disebabkan oleh virus yang menyerang system. Tetapi bisa juga disebabkan oleh hilang/rusaknya file kernel32.dll yaitu ditandai dengan windows langsung restart saat baru muncul logo windows berlatar belakang hitam sebelum masuk jendela welcome screen layar biru.
Masalah yang sama juga terjadi saat masuk ke safemode yang selalu restart dan gagal booting ke windows sehingga anda tidak bisa masuk ke dalam windows.Anda dapat mengembalikan file kernel32.dll yang hilang/rusak dengan menggunakan CD Windows XP,jalankan cara dibawah ini:
Masukan CD Windows XP kedalam drive CdRoom anda.
Restart komputer dan booting dari CD Windows XP dengan memilih urutan boot prioritas pertama pada CdRoom.
Setelah masuk ke layar instalasi,tekan tombol [R] untuk menuju mode Recovery console.
Pilih lokasi instalasi Windows XP anda dan masukan password administrator.
Setelah muncul command prompt ketik:
cd system32 lalu
ren kernel32.dll kernel32.old lalu enter.
expand D:\i386\kernel32.dl_ tekan enter lagi.
exit
This attachment type cannot be viewed on your device
This attachment type cannot be viewed on your device
If you are receiving this error message when you try to open an attachment to an email this might help. My problem was that I did not have the "Blackberry Attachment Service" loaded into my phone applications. Connected my phone to Desktop Manager and sure enough the Blackberry Attachment Service Box was unchecked. I checked the box and completed the add application through Desktop Manager and I was set. NOTE: The messages that I had received prior to adding the Attachment Service still gave the error message when I tried to open them. But all messages received after installing the Attachment Service opened without any problems. If this does not fix your problem search Blackberry.com forums they listed some other fixes for this problem. The one stated above solved my problem.
NT Authority\System Error Message
NT Authority\System Error Message: "This system is shutting down. Windows must now restart because the Remote Procedure Call (RPC) service terminated unexpectedly."
Affected Products: Software, System CD/DVDs
Affected Operating Systems: Windows NT® 4.0, Windows® 2000, Windows® XPISSUE:
Note: If you have a Gateway Server, click here. When starting your computer, you may see the following error message:
System Shutdown
This system is shutting down. Please save all work in progress
and log off. Any unsaved changes will be lost. This shutdown
was initiated by NT AUTHORITY\SYSTEM
Time before shutdown:
Message:
Windows must now restart because the Remote Procedure Call
(RPC) service terminated unexpectedly
Note: If you disconnect your computer from its broadband connection, it does not shut down. Remove the cable from the network card or unplug the USB cable modem.
Note: This is in reference to issue number 2-976684501.
Note: There are currently, and may continue to be, variants to this worm virus. Your computer may also be infected with other viruses, yet this worm virus has made the issue known. Please check with your antivirus software manufacturer to obtain the latest updates for your antivirus software, as well as instructions for the removal of all viruses.
To help avoid these types of issues in the future, be sure to schedule regular updates for both your antivirus software and Windows critical updates. It is also recommended that on a regular basis you make a backup copy of all important data.
This document is intended for a computer that is not infected with any other viruses other than this worm virus. Gateway technical support does not normally support virus removal or any other virus issue. However, since this worm virus widely affects many computer users, we wanted to provide assistance as a courtesy.
RESOLUTION: Note: Gateway does not support viruses. All customers affected by this should be directed to Symantec or Answers by Gateway for support and resolution. We initially provided support for this virus because of the impact to our customers, however we now need to adhere to our virus policy. Note: Please read all information in this document before attempting to clean your computer. You may also want to print a copy of this document to have at your disposal when attempting to clean your computer. For best printing results, in your Internet browser, from the File menu, click Print.
There is a lot of information contained in the document on combating what you may see, including how to stop the shut down process so that you can complete the steps. Also, you must install the Microsoft patch to prevent this type of issue from reoccurring.
There are four resolution options available.
Note: Follow Resolution #1 first, and then proceed to either Resolution #2 or #3, depending on your antivirus software.
- Resolution #1: Download and install the Symantec W32.Blaster.Worm Removal Tool
- Resolution #2: If you have a current subscription to Norton AntiVirus
- Resolution #3: If you do not have a current subscription to Norton AntiVirus
- Resolution #4: Write zeros to the hard drive, Fdisk, format, and then reload the computer
- From the Start menu, click Run.
- In the Run dialog box, type: shutdown -a. Click OK.
Note: You need to be logged in with Administrative rights to run this tool in Windows 2000 or Windows XP.
- Download the FixBlast.exe file from the Symantec Web site.
- Save the file to a convenient location, such as the Downloads folder or the Windows Desktop, or to removable media that is known to be uninfected, if possible.
- If you would like, check the authenticity of the digital signature. This step is optional.
- Close all open windows and programs before running the tool.
- If you are using Windows XP, disable System Restore. CAUTION: If you are running Windows XP, it is strongly recommend that you do not skip this step. The removal procedure may be unsuccessful if Windows XP System Restore is not disabled, as Windows prevents outside programs from modifying System Restore.
- End task on msblast.exe.
- On your keyboard, press the CTRL+ALT+DELETE keys.
- In the Windows Security window, click Task Manager.
- In the Windows Task Manager window, click the Processes tab.
- On the Processes tab, click msblast.exe, and then click End Process.
View Picture
- Locate and double-click the FixBlast.exe file to start the removal tool.
- In the Symantec W32.Blaster.Worm Fix Tool dialog box, click Start to begin the process.
- Allow the tool to run. Note: When running the tool, if you see a message that the tool was unable to remove one or more files, run the tool in Safe mode. Shut down the computer, turn off the power, and wait 30 seconds. Restart the computer in Safe mode, and then run the tool again.
- For Windows XP, download and install the "Blaster Worm: Critical Security Patch for Windows XP" patch from the Microsoft Web site to prevent this type of attack. Windows XP shipped with Gateway computers is a 32-bit operating system.
- For Windows 2000, download and install the "Blaster Worm: Critical Security Patch for Windows 2000" patch from the Microsoft Web site to prevent this type of attack.
- For Windows NT, download and install the "Blaster Worm: Critical Security Patch for Windows NT 4.0" patch from the Microsoft Web site to prevent this type of attack.
- Run the FixBlast.exe removal tool again to ensure that the computer is clean of the virus.
- If you are running Windows XP, reenable System Restore if the computer is clean.
- Run LiveUpdate to make sure that you are using the most current virus definitions.
- Total number of the scanned files
- Number of deleted files
- Number of terminated viral processes
- Number of fixed registry entries
Resolution #2: If you have a current subscription to Norton AntiVirus:
Note: Please see the Symantec Web site for additional information.
- Disable System Restore.
- Run LiveUpdate to update the virus definitions. Note: If you are unable to download the update, follow step number 2 in Resolution #3 below, and then attempt to run LiveUpdate again.
- Restart the computer in Safe mode.
- End task on msblast.exe.
- On your keyboard, press the CTRL+ALT+DELETE keys.
- In the Windows Security window, click Task Manager.
- In the Windows Task Manager window, click the Processes tab.
- On the Processes tab, click msblast.exe, and then click End Process.
View Picture
- Use Norton AntiVirus to scan for and delete any infected files.
- Run a full system scan.
- If any files are detected as infected with W32.Blaster.Worm, click Delete.
- Delete the registry value.
- From the Start menu, click Run.
- In the Run dialog box, type: Regedit. Click OK.
- In the Registry Editor window, locate the following key: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Run
- Delete the following entries, if present: Windows Auto Update and msblast.exe.
- Click to select the registry name.
- From the Edit menu, click Delete.
- In the Confirm Value Delete dialog box, click Yes.
- Repeat these steps for each registry name entry.
- If applicable, repeat steps c and d, this time checking for the following key: HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Run. If this key is not found, you can skip this step.
- In the Registry Editor window, from the File menu, click Exit.
- For Windows XP, download and install the "Blaster Worm: Critical Security Patch for Windows XP" patch from the Microsoft Web site to prevent this type of attack. Windows XP shipped with Gateway computers is a 32-bit operating system.
- For Windows 2000, download and install the "Blaster Worm: Critical Security Patch for Windows 2000" patch from the Microsoft Web site to prevent this type of attack.
- For Windows NT, download and install the "Blaster Worm: Critical Security Patch for Windows NT 4.0" patch from the Microsoft Web site to prevent this type of attack.
- Use Norton AntiVirus again to scan for and remove any infected files.
- Run another full system scan.
- If any additional files are detected as infected with W32.Blaster.Worm, click Delete.
- If you are running Windows XP, reenable System Restore if the computer is clean.
- Run Windows Update, and then download and install all critical updates. Note: You may need to run Windows Update more than once. Run this step until no more critical updates are listed.
Note: To make sure that your current is up to date with critical updates, run Windows Update on a regular basis. Also, be sure to regularly use an updated antivirus program, such as Norton AntiVirus.
- Disable System Restore.
- Enable the Microsoft Firewall. You should be able to complete this step without losing your current Internet connection.
- Open Control Panel.
- From the Windows XP default Start menu, click Control Panel.
- From the Windows XP classic Start menu, point to Settings, and then click Control Panel .
- In Control Panel, open Network Connections.
- If the computer is in Category View, click Network and Internet Connections, and then click Network Connections.
- If the computer is in Classic View, double-click the Network Connections icon.
- In the Network Connections window, click to select the local area connection.
- From the File menu, click Properties.
- In the Local Area Connection Properties window, click the Advanced tab.
- On the Advanced tab, click the Protect my computer and network by limiting or preventing access to this computer from the Internet check box, and then click OK.
- Close Control Panel.
- Open Control Panel.
- For Windows XP, download and install the "Blaster Worm: Critical Security Patch for Windows XP" patch from the Microsoft Web site to prevent this type of attack. Windows XP shipped with Gateway computers is a 32-bit operating system.
- For Windows 2000, download and install the "Blaster Worm: Critical Security Patch for Windows 2000" patch from the Microsoft Web site to prevent this type of attack.
- For Windows NT, download and install the "Blaster Worm: Critical Security Patch for Windows NT 4.0" patch from the Microsoft Web site to prevent this type of attack.
- Delete the registry value.
- From the Start menu, click Run.
- In the Run dialog box, type: Regedit. Click OK.
- In the Registry Editor window, locate the following key: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Run
- Delete the following entries, if present: Windows Auto Update and msblast.exe.
- Click to select the registry name.
- From the Edit menu, click Delete.
- In the Confirm Value Delete dialog box, click Yes.
- Repeat these steps for each registry name entry.
- If applicable, repeat steps c and d, this time checking for the following key: HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Run. If this key is not found, you can skip this step.
- In the Registry Editor window, from the File menu, click Exit.
- End task on msblast.exe.
- On your keyboard, press the CTRL+ALT+DELETE keys.
- In the Windows Security window, click Task Manager.
- In the Windows Task Manager window, click the Processes tab.
- On the Processes tab, click msblast.exe, and then click End Process.
- Delete msblast.exe.
- From the Start menu, point to Search, and then click For Files or Folders.
- In the Search Results window, in the What do you want to search for list, click All files and folders.
- In the All or part of the file name area, type: msblast.
- Verify that the Look in field lists Local Hard Drives.
- Click Search.
- When the msblast.exe file is found, click to select it, and then from the File menu, click Delete.
- In the Confirm File Delete dialog box, click Yes.
- In the Search Results window, from the File menu, click Exit.
- Empty the Recycle Bin.
- If you are running Windows XP, reenable System Restore if the computer is clean.
- Run Windows Update, and then download and install all critical updates. Note: To make sure that your current is up to date with critical updates, run Windows Update on a regular basis. Also, be sure to regularly use an updated antivirus program, such as Norton AntiVirus.
This is to be used as a last resort when all other attempts have failed. Turn off the computer, and then disconnect the Internet connection from the computer. Write zeros to the hard drive, Fdisk, format, and then reload the computer. Enable the firewall before reconnecting to the Internet, and then immediately run Windows Update for critical updates and the virus scan updates.
Note: To make sure that your computer is up to date with critical updates, run Windows Update on a regular basis. Also, be sure to regularly use an updated antivirus program, such as Norton AntiVirus.
Note: You may need to run Windows Update more than once. Run this step until no more critical updates appear.
Note: Please read all information in this document before attempting to clean your computer. You may also want to print a copy of this document to have at your disposal when attempting to clean your computer. For best printing results, in your Internet browser, from the File menu, click Print.
There is a lot of information contained in the document on combating what you may see, including how to stop the shut down process so that you can complete the steps. Also, you must install the Microsoft patch to prevent this type of issue from reoccurring.
There are three resolution options available.
Note: Follow Resolution #1 first, and then proceed to either Resolution #2 or #3, depending on your antivirus software.
- Resolution #1: Download and install the Symantec W32.Blaster.Worm Removal Tool
- Resolution #2: If you have a current subscription to Norton AntiVirus
- Resolution #3: If you do not have a current subscription to Norton AntiVirus
- From the Start menu, click Run.
- In the Run dialog box, type: shutdown -a. Click OK.
Note: You need to be logged in with Administrative rights to run this tool in Windows 2000 or Windows XP.
- Download the FixBlast.exe file from the Symantec Web site.
- Save the file to a convenient location, such as the Downloads folder or the Windows Desktop, or to removable media that is known to be uninfected, if possible.
- If you would like, check the authenticity of the digital signature. This step is optional.
- Close all open windows and programs before running the tool.
- If you are using Windows XP, disable System Restore. CAUTION: If you are running Windows XP, it is strongly recommend that you do not skip this step. The removal procedure may be unsuccessful if Windows XP System Restore is not disabled, as Windows prevents outside programs from modifying System Restore.
- End task on msblast.exe.
- On your keyboard, press the CTRL+ALT+DELETE keys.
- In the Windows Security window, click Task Manager.
- In the Windows Task Manager window, click the Processes tab.
- On the Processes tab, click msblast.exe, and then click End Process.
View Picture
- Locate and double-click the FixBlast.exe file to start the removal tool.
- In the Symantec W32.Blaster.Worm Fix Tool dialog box, click Start to begin the process.
- Allow the tool to run. Note: When running the tool, if you see a message that the tool was unable to remove one or more files, run the tool in Safe mode. Shut down the computer, turn off the power, and wait 30 seconds. Restart the computer in Safe mode, and then run the tool again.
- For Windows XP, download and install the "Blaster Worm: Critical Security Patch for Windows XP" patch from the Microsoft Web site to prevent this type of attack. Windows XP shipped with Gateway computers is a 32-bit operating system.
- For Windows 2000, download and install the "Blaster Worm: Critical Security Patch for Windows 2000" patch from the Microsoft Web site to prevent this type of attack.
- For Windows NT, download and install the "Blaster Worm: Critical Security Patch for Windows NT 4.0" patch from the Microsoft Web site to prevent this type of attack.
- Run the FixBlast.exe removal tool again to ensure that the computer is clean of the virus.
- If you are running Windows XP, reenable System Restore if the computer is clean.
- Run LiveUpdate to make sure that you are using the most current virus definitions.
- Total number of the scanned files
- Number of deleted files
- Number of terminated viral processes
- Number of fixed registry entries
Resolution #2: If you have a current subscription to Norton AntiVirus:
Note: Please see the Symantec Web site for additional information.
- Disable System Restore.
- Run LiveUpdate to update the virus definitions. Note: If you are unable to download the update, follow step number 2 in Resolution #3 below, and then attempt to run LiveUpdate again.
- Restart the computer in Safe mode.
- End task on msblast.exe.
- On your keyboard, press the CTRL+ALT+DELETE keys.
- In the Windows Security window, click Task Manager.
- In the Windows Task Manager window, click the Processes tab.
- On the Processes tab, click msblast.exe, and then click End Process.
View Picture
- Use Norton AntiVirus to scan for and delete any infected files.
- Run a full system scan.
- If any files are detected as infected with W32.Blaster.Worm, click Delete.
- Delete the registry value.
- From the Start menu, click Run.
- In the Run dialog box, type: Regedit. Click OK.
- In the Registry Editor window, locate the following key: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Run
- Delete the following entries, if present: Windows Auto Update and msblast.exe.
- Click to select the registry name.
- From the Edit menu, click Delete.
- In the Confirm Value Delete dialog box, click Yes.
- Repeat these steps for each registry name entry.
- If applicable, repeat steps c and d, this time checking for the following key: HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Run. If this key is not found, you can skip this step.
- In the Registry Editor window, from the File menu, click Exit.
- For Windows XP, download and install the "Blaster Worm: Critical Security Patch for Windows XP" patch from the Microsoft Web site to prevent this type of attack. Windows XP shipped with Gateway computers is a 32-bit operating system.
- For Windows 2000, download and install the "Blaster Worm: Critical Security Patch for Windows 2000" patch from the Microsoft Web site to prevent this type of attack.
- For Windows NT, download and install the "Blaster Worm: Critical Security Patch for Windows NT 4.0" patch from the Microsoft Web site to prevent this type of attack.
- Use Norton AntiVirus again to scan for and remove any infected files.
- Run another full system scan.
- If any additional files are detected as infected with W32.Blaster.Worm, click Delete.
- If you are running Windows XP, reenable System Restore if the computer is clean.
- Run Windows Update, and then download and install all critical updates. Note: You may need to run Windows Update more than once. Run this step until no more critical updates are listed.
Note: To make sure that your current is up to date with critical updates, run Windows Update on a regular basis. Also, be sure to regularly use an updated antivirus program, such as Norton AntiVirus.
Note: If you would like to purchase a copy of Norton AntiVirus, please visit the Gateway Accessory Store.
- Disable System Restore.
- Enable the Microsoft Firewall. You should be able to complete this step without losing your current Internet connection.
- Open Control Panel.
- From the Windows XP default Start menu, click Control Panel.
- From the Windows XP classic Start menu, point to Settings, and then click Control Panel .
- In Control Panel, open Network Connections.
- If the computer is in Category View, click Network and Internet Connections, and then click Network Connections.
- If the computer is in Classic View, double-click the Network Connections icon.
- In the Network Connections window, click to select the local area connection.
- From the File menu, click Properties.
- In the Local Area Connection Properties window, click the Advanced tab.
- On the Advanced tab, click the Protect my computer and network by limiting or preventing access to this computer from the Internet check box, and then click OK.
- Close Control Panel.
- Open Control Panel.
- For Windows XP, download and install the "Blaster Worm: Critical Security Patch for Windows XP" patch from the Microsoft Web site to prevent this type of attack. Windows XP shipped with Gateway computers is a 32-bit operating system.
- For Windows 2000, download and install the "Blaster Worm: Critical Security Patch for Windows 2000" patch from the Microsoft Web site to prevent this type of attack.
- For Windows NT, download and install the "Blaster Worm: Critical Security Patch for Windows NT 4.0" patch from the Microsoft Web site to prevent this type of attack.
- Delete the registry value.
- From the Start menu, click Run.
- In the Run dialog box, type: Regedit. Click OK.
- In the Registry Editor window, locate the following key: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Run
- Delete the following entries, if present: Windows Auto Update and msblast.exe.
- Click to select the registry name.
- From the Edit menu, click Delete.
- In the Confirm Value Delete dialog box, click Yes.
- Repeat these steps for each registry name entry.
- If applicable, repeat steps c and d, this time checking for the following key: HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Run. If this key is not found, you can skip this step.
- In the Registry Editor window, from the File menu, click Exit.
- End task on msblast.exe.
- On your keyboard, press the CTRL+ALT+DELETE keys.
- In the Windows Security window, click Task Manager.
- In the Windows Task Manager window, click the Processes tab.
- On the Processes tab, click msblast.exe, and then click End Process.
- Delete msblast.exe.
- From the Start menu, point to Search, and then click For Files or Folders.
- In the Search Results window, in the What do you want to search for list, click All files and folders.
- In the All or part of the file name area, type: msblast.
- Verify that the Look in field lists Local Hard Drives.
- Click Search.
- When the msblast.exe file is found, click to select it, and then from the File menu, click Delete.
- In the Confirm File Delete dialog box, click Yes.
- In the Search Results window, from the File menu, click Exit.
- Empty the Recycle Bin.
- If you are running Windows XP, reenable System Restore if the computer is clean.
- Run Windows Update, and then download and install all critical updates. Note: To make sure that your current is up to date with critical updates, run Windows Update on a regular basis. Also, be sure to regularly use an updated antivirus program, such as Norton AntiVirus.
Langganan:
Postingan (Atom)
-
PLS BE INFORMED IMMEDIATELY! A virus is on a rampage in Messengers. The virus name is WORM_SOHAND.I. It shows itself as an innocent IM with ...
-
NT Authority\System Error Message: "This system is shutting down. Windows must now restart because the Remote Procedure Call (RPC) ser...
-
How Does the Welchia Worm Infect My Computer? Copies itself to the Wins directory in the System or System32 folder in Windows usually C:...
